Product ID:UF-3119 ADHESIVE
MSDS Date:10/04/1985
FSC:8030
NIIN:00-082-0115
MSDS Number: BJVYS

Emergency Phone: (801) 863-8545

Info Phone: (801) 863-8545

Preparer: J. W. JENSEN

Cage: 07703

Telephone: 435-863-8545,435-863-3325

Cage: 07703

BISPHENOL A EPICHLOROHYDRIN (LIQUID EPOXY)

Fraction By Weight: 35%

ANCAMINE 350 A (POLYAMIDE RESIN)

CAS: 88384-96-7

Fraction By Weight: 65%

LD50 LC50 Mixture:ORAL LD50 (RAT): 6.5 G/KG
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES/INHALATION: IRRITATION. SKIN:
IRRITATION, DERMATITIS, SENSITIZATION, & ALLERGIC RESPONSES.
INGESTION: TOXIC.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:INHALATION/EYES: IRRITATION. SKIN: IRRITATION,
DERMATITIS, SENSITIZATION, & ALLERGIC RESPONSES. INGESTION: TOXIC.

First Aid:EYES: FLUSH W/WATER FOR AT LEAST 15 MINS. SKIN: WASH W/SOAP &
WATER. INGESTION/INHALATION: OBTAIN MEDICAL ATTENTION.

Flash Point:>200F
Extinguishing Media:CO2 OR FOAM
Fire Fighting Procedures:WEAR SELF-CONTAINED BREATHING APPARATUS & FULL
PROTECTIVE CLOTHING.

Spill Release Procedures:USE ABSORBENT MATERIAL TO COLLECT & CONTAIN
FOR DISPOSAL OR RECYCLING.

Handling and Storage Precautions:COMPLY W/APPROPRIATE HANDLING &
STORAGE REGULATIONS. DON'T MIX IN QUANTITIES >ONE QT OR HEAT TO
TEMPERATURES >150F. FOR INDUSTRIAL USE ONLY.

Respiratory Protection:WEAR NIOSH/MSHA APPROVED AIR PURIFYING
RESPIRATOR DURING MIXING & CURING. ENGINEERING & ADMINISTRATIVE
CONTROLS MAY ALSO BE IMPLEMENTED TO REDUCE EXPOSURE.
Ventilation:PROVIDE SUFFICIENT MECHANICAL/LOCAL EXHAUST VENTILATION TO
KEEP Protective Gloves:IMPERVIOUS
Eye Protection:SAFETY GLASSES W/SIDE SHIELD/MONOGOGGLES
Supplemental Safety and Health
THIS PRODUCT IS AN AMBER TO BROWN RESILIENT PLASTIC IN THE CURED STATE.

Spec Gravity:>1
Solubility in Water:<0.1%
Appearance and Odor:VISCOUS AMBER LIQUID W/SLIGHT STYRENE-LIKE ODOR.

Stability Indicator/Materials to Avoid:YES
BASES, STRONG ACIDS & WATER (IF UNCURED)
Hazardous Decomposition Products:CO2 & INCOMPLETELY BURNED CARBON
PRODUCTS
Conditions to Avoid Polymerization:TEMPERATURES >150F, MIXING IN
QUANTITIES >1 QT.

Waste Disposal Methods:ALL WASTES SHOULD BE DISPOSED IN ACCORDANCE
W/FEDERAL, STATE, & LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.